Threshold TOP
Summary
The Threshold TOP creates a matte with pixel values set to 0 for pixels below the threshold value, and 1 for pixels greater than or equal to the threshold value.
Parameters - Threshold Page
Comparator
comparator
- ⊞ - Select the operation to compare the Threshold parameter to.
- Less
less
-
- Greater
greater
-
- Less or Equal
lessorequal
-
- Greater or Equal
greaterorequal
-
- Equal
equal
-
- Not Equal
notequal
-
RGB
rgb
- ⊞ - Determines which part of the image used to calculate threshold. This parameter determines the output for the R, G, and B channels.
- Luminance
luminance
- Threshold calculated based on luminance values.
- Red
red
- Threshold calculated based on red channel values.
- Green
green
- Threshold calculated based on green channel values.
- Blue
blue
- Threshold calculated based on blue channel values.
- Alpha
alpha
- Threshold calculated based on alpha channel values.
- RGB Average
rgbaverage
- Threshold calculated based on combined RGB average values.
- RGBA Average
average
- Threshold calculated based on combined RGBA average values.
Threshold
threshold
- Using the function selected in the Comparator parameter, any pixel that satisfies this value will be set to 0. For example, if Comparator = Less then any pixel less than this Threshold value will be set to 0.
Alpha
alpha
- ⊞ - This parameter determines the output for the alpha channel.
- Same as RGB
same
- Sets the alpha channel to be the same as the RGB channels.
- One
one
- Sets the Alpha channel to one.
Soften
soften
- The rate of falloff at the threshold value. As this value set set larger, pixels near the threshold value will be set to something between 0-1.
Parameters - Common Page
Output Resolution
outputresolution
- ⊞ - quickly change the resolution of the TOP's data.
- Use Input
useinput
- Uses the input's resolution.
- Eighth
eighth
- Multiply the input's resolution by that amount.
- Quarter
quarter
- Multiply the input's resolution by that amount.
- Half
half
- Multiply the input's resolution by that amount.
- 2X
2x
- Multiply the input's resolution by that amount.
- 4X
4x
- Multiply the input's resolution by that amount.
- 8X
8x
- Multiply the input's resolution by that amount.
- Fit Resolution
fit
- Fits the width and height to the resolution given below, while maintaining the aspect ratio.
- Limit Resolution
limit
- The width and height are limited to the resolution given below. If one of the dimensions exceeds the given resolution, the width and height will be reduced to fit inside the given limits while maintaining the aspect ratio.
- Custom Resolution
custom
- Enables the Resolution parameter below, giving direct control over width and height.
Resolution
resolution
- ⊞ - Enabled only when the Resolution parameter is set to Custom Resolution. Some Generators like Constant and Ramp do not use inputs and only use this field to determine their size. The drop down menu on the right provides some commonly used resolutions.
- W
resolutionw
-
- H
resolutionh
-
Use Global Res Multiplier
resmult
- Uses the Global Resolution Multiplier found in Edit>Preferences>TOPs. This multiplies all the TOPs resolutions by the set amount. This is handy when working on computers with different hardware specifications. If a project is designed on a desktop workstation with lots of graphics memory, a user on a laptop with only 64MB VRAM can set the Global Resolution Multiplier to a value of half or quarter so it runs at an acceptable speed. By checking this checkbox on, this TOP is affected by the global multiplier.
Output Aspect
outputaspect
- ⊞ - Sets the image aspect ratio allowing any textures to be viewed in any size. Watch for unexpected results when compositing TOPs with different aspect ratios. (You can define images with non-square pixels using xres, yres, aspectx, aspecty where xres/yres != aspectx/aspecty.)
- Use Input
useinput
- Uses the input's aspect ratio.
- Resolution
resolution
- Uses the aspect of the image's defined resolution (ie 512x256 would be 2:1), whereby each pixel is square.
- Custom Aspect
custom
- Lets you explicitly define a custom aspect ratio in the Aspect parameter below.
Aspect
aspect
- ⊞ - Use when Output Aspect parameter is set to Custom Aspect.
- Aspect1
aspect1
-
- Aspect2
aspect2
-
Input Smoothness
inputfiltertype
- ⊞ - This controls pixel filtering on the input image of the TOP.
- Nearest Pixel
nearest
- Uses nearest pixel or accurate image representation. Images will look jaggy when viewing at any zoom level other than Native Resolution.
- Interpolate Pixels
linear
- Uses linear filtering between pixels. This is how you get TOP images in viewers to look good at various zoom levels, especially useful when using any Fill Viewer setting other than Native Resolution.
- Mipmap Pixels
mipmap
- Uses mipmap filtering when scaling images. This can be used to reduce artifacts and sparkling in moving/scaling images that have lots of detail.
Fill Viewer
fillmode
- ⊞ - Determine how the TOP image is displayed in the viewer.
NOTE:To get an understanding of how TOPs work with images, you will want to set this to Native Resolution as you lay down TOPs when starting out. This will let you see what is actually happening without any automatic viewer resizing.
- Use Input
useinput
- Uses the same Fill Viewer settings as it's input.
- Fill
fill
- Stretches the image to fit the edges of the viewer.
- Fit Horizontal
width
- Stretches image to fit viewer horizontally.
- Fit Vertical
height
- Stretches image to fit viewer vertically.
- Fit Best
best
- Stretches or squashes image so no part of image is cropped.
- Fit Outside
outside
- Stretches or squashes image so image fills viewer while constraining it's proportions. This often leads to part of image getting cropped by viewer.
- Native Resolution
nativeres
- Displays the native resolution of the image in the viewer.
Viewer Smoothness
filtertype
- ⊞ - This controls pixel filtering in the viewers.
- Nearest Pixel
nearest
- Uses nearest pixel or accurate image representation. Images will look jaggy when viewing at any zoom level other than Native Resolution.
- Interpolate Pixels
linear
- Uses linear filtering between pixels. Use this to get TOP images in viewers to look good at various zoom levels, especially useful when using any Fill Viewer setting other than Native Resolution.
- Mipmap Pixels
mipmap
- Uses mipmap filtering when scaling images. This can be used to reduce artifacts and sparkling in moving/scaling images that have lots of detail.
Passes
npasses
- Duplicates the operation of the TOP the specified number of times. Making this larger than 1 is essentially the same as taking the output from each pass, and passing it into the first input of the node and repeating the process. Other inputs and parameters remain the same for each pass.
Channel Mask
chanmask
- Allows you to choose which channels (R, G, B, or A) the TOP will operate on. All channels are selected by default.
Pixel Format
format
- ⊞ - Format used to store data for each channel in the image (ie. R, G, B, and A). Refer to Pixel Formats for more information.
- Use Input
useinput
- Uses the input's pixel format.
- 8-bit fixed (RGBA)
rgba8fixed
- Uses 8-bit integer values for each channel.
- sRGB 8-bit fixed (RGBA)
srgba8fixed
- Uses 8-bit integer values for each channel and stores color in sRGB colorspace.
- 16-bit float (RGBA)
rgba16float
- Uses 16-bits per color channel, 64-bits per pixel.
- 32-bit float (RGBA)
rgba32float
- Uses 32-bits per color channel, 128-bits per pixels.
- 10-bit RGB, 2-bit Alpha, fixed (RGBA)
rgb10a2fixed
- Uses 10-bits per color channel and 2-bits for alpha, 32-bits total per pixel.
- 16-bit fixed (RGBA)
rgba16fixed
- Uses 16-bits per color channel, 64-bits total per pixel.
- 11-bit float (RGB), Positive Values Only
rgba11float
- A RGB floating point format that has 11 bits for the Red and Green channels, and 10-bits for the Blue Channel, 32-bits total per pixel (therefore the same memory usage as 8-bit RGBA). The Alpha channel in this format will always be 1. Values can go above one, but can't be negative. ie. the range is [0, infinite).
- 16-bit float (RGB)
rgb16float
-
- 32-bit float (RGB)
rgb32float
-
- 8-bit fixed (Mono)
mono8fixed
- Single channel, where RGB will all have the same value, and Alpha will be 1.0. 8-bits per pixel.
- 16-bit fixed (Mono)
mono16fixed
- Single channel, where RGB will all have the same value, and Alpha will be 1.0. 16-bits per pixel.
- 16-bit float (Mono)
mono16float
- Single channel, where RGB will all have the same value, and Alpha will be 1.0. 16-bits per pixel.
- 32-bit float (Mono)
mono32float
- Single channel, where RGB will all have the same value, and Alpha will be 1.0. 32-bits per pixel.
- 8-bit fixed (RG)
rg8fixed
- A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 8-bits per channel, 16-bits total per pixel.
- 16-bit fixed (RG)
rg16fixed
- A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 16-bits per channel, 32-bits total per pixel.
- 16-bit float (RG)
rg16float
- A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 16-bits per channel, 32-bits total per pixel.
- 32-bit float (RG)
rg32float
- A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 32-bits per channel, 64-bits total per pixel.
- 8-bit fixed (A)
a8fixed
- An Alpha only format that has 8-bits per channel, 8-bits per pixel.
- 16-bit fixed (A)
a16fixed
- An Alpha only format that has 16-bits per channel, 16-bits per pixel.
- 16-bit float (A)
a16float
- An Alpha only format that has 16-bits per channel, 16-bits per pixel.
- 32-bit float (A)
a32float
- An Alpha only format that has 32-bits per channel, 32-bits per pixel.
- 8-bit fixed (Mono+Alpha)
monoalpha8fixed
- A 2 channel format, one value for RGB and one value for Alpha. 8-bits per channel, 16-bits per pixel.
- 16-bit fixed (Mono+Alpha)
monoalpha16fixed
- A 2 channel format, one value for RGB and one value for Alpha. 16-bits per channel, 32-bits per pixel.
- 16-bit float (Mono+Alpha)
monoalpha16float
- A 2 channel format, one value for RGB and one value for Alpha. 16-bits per channel, 32-bits per pixel.
- 32-bit float (Mono+Alpha)
monoalpha32float
- A 2 channel format, one value for RGB and one value for Alpha. 32-bits per channel, 64-bits per pixel.
Operator Inputs
- Input 0: -
Info CHOP Channels
Extra Information for the Threshold TOP can be accessed via an Info CHOP.
Common TOP Info Channels
- resx - Horizontal resolution of the TOP in pixels.
- resy - Vertical resolution of the TOP in pixels.
- aspectx - Horizontal aspect of the TOP.
- aspecty - Vertical aspect of the TOP.
- depth - Depth of 2D or 3D array if this TOP contains a 2D or 3D texture array.
- gpu_memory_used - Total amount of texture memory used by this TOP.
Common Operator Info Channels
- total_cooks - Number of times the operator has cooked since the process started.
- cook_time - Duration of the last cook in milliseconds.
- cook_frame - Frame number when this operator was last cooked relative to the component timeline.
- cook_abs_frame - Frame number when this operator was last cooked relative to the absolute time.
- cook_start_time - Time in milliseconds at which the operator started cooking in the frame it was cooked.
- cook_end_time - Time in milliseconds at which the operator finished cooking in the frame it was cooked.
- cooked_this_frame - 1 if operator was cooked this frame.
- warnings - Number of warnings in this operator if any.
- errors - Number of errors in this operator if any.
TouchDesigner Build: