I’ve upgraded to win 10 from 7 in order to use the realsense F200.
At the first time it wouldn’t work, so I’ve found this thead where is specificated to work with the R4 SDK.
After uninstalling the R1 2016. runtime and driver, I’ve found the 1.4 driver and the R4 runtime, but I’m still unable to find the R4 SDK.
Does someone has a direct link to download?
BTW it seems to work with previous and current TD version (58910 - 58620), but is very hard to get correct gesture recognition and often loses hand tracking.
Is it because I miss R4 SDK?
Is there a chance to work with the latest SDK which seams more accurate?
I’m working with the SR300 in 099 and it’s been great so far. Thank you for the support. I’m running into a problem though relating to some of the laser power settings on the camera.
In my setup, the camera is facing down onto a table detecting hands and objects. The camera’s laser projection power seems to want to auto adjust, I’m guessing to try to get a good exposure range. The side effect is that it gives me noisy edges and a black halo on the background, which leads to messy foreground extraction. I’ve tried many materials (foamcore, cardboard, wood, different colored papers) but the effect is the same- the camera auto adjusts the laser power down. I’ve illustrated the effect in my attachment.
Some googling led me to this utility which has the ability to control the laser power along with other useful features like accuracy, motion range tradeoff, and depth confidence threshold. I was able to install and run this utility for the SR300 on Windows 10 and can confirm that setting the laser power level manually fixes my issue. software.intel.com/en-us/forums … pic/537872
It also retrieves the depth map in 32bit float format and at a variable framerate depending on what Motion-Range tradeoff is set at. You can run this along side Derivative’s other Realsense nodes without conflict.
You should just need the .dll found in Debug/x64/SenseTOP.dll. I’m not sure if you need the full 2016 R2 SDK or just the redistributable though. FYI this is very fresh so it’s a little rough around the edges.
having trouble getting my Realsense R200 working in TD.
I’ve installed the most current SDK and the driver for my R200. Are there any other steps I might be missing? Also as of just yesterday access to all legacy Runtime/SDK is discontinued by intel for security reasons.
Error is “failed to initializes realsense runtime. Ensure Runtime/SDK version is 6.0.21.6598 is installed, or try restarting the Realsense service”
This error happens in the newest version of TD88, and in TD99 with a different SDK version noted. As noted above I cannot revert to V4 which seems to match the version TD88 is requesting.
Video works fine from the camera using “video device in” TOP
099 requires version 10.X of the SDK. Also called 2016 R2. Did you install that, or 2016 R3?
Older versions can be found here, you can just get the runtime instead of the full SDK. The full SDK doesn’t be actually needed.
Going to up the priority on this. We’ve implemented their new libRealSense API which is what supports the new cameras. It just needs more testing right now