Login | Register 
FEATURES
APPLICATIONS
DOWNLOADS
EDUCATION
BLOG
WIKI
FORUM
STORE

EtherDream V2

Discuss graphics hardware, computer hardware, and input/output devices to use with TouchDesigner

EtherDream V2

Postby franzrosati » Fri Apr 28, 2017 4:24 am

hi there!

Does anybody here uses the EtherDream V2 successfully in TouchDesigner?
Protocol is the same so it should work flawlessly.
Any experience?

Thanks you!
F
franzrosati
 
Posts: 13
Joined: Sun Dec 05, 2010 5:47 pm

Re: EtherDream V2

Postby ben » Sat May 06, 2017 9:15 am

We do not have one in house but some people have reported it works well!
User avatar
ben
Staff
 
Posts: 2557
Joined: Thu Nov 08, 2007 6:55 pm
Location: Toronto

Re: EtherDream V2

Postby jmt4zj » Mon May 15, 2017 5:02 pm

Just starting using one a while ago. I don't know exactly the specifics of the expected behavior as I never used a v1, but everything seems to be behaving properly.
Jonathan Thompson
@pointshader
http://pointshader.com
User avatar
jmt4zj
 
Posts: 160
Joined: Mon Nov 01, 2010 3:15 am
Location: NYC

Re: EtherDream V2

Postby christophermorgan » Sun Oct 01, 2017 5:09 am

It works well. I don't know why you have problems with it
On this site I have found a lot of reliable tips for my software and programs. Thanx a lot!
christophermorgan
 
Posts: 1
Joined: Sun Oct 01, 2017 4:25 am

Re: EtherDream V2

Postby Real.Eyez » Tue Mar 19, 2019 5:36 am

Hi Guys,
I recently just invested in an etherdream v2 and was wondering if you might have any tips on acquiring the IP address i need to input to the dmx-out CHOP...I have run 'sitter' as recommended on other laser related forums but it does not give me any information...currently I have the etherdream connected by both usb and ethernet to my laptop and then ILDA to the laser...am I just being really silly and not realising it is simply my own computers IP that I am supposed to be putting in or am I missing a step somewhere? Any help would be greatly appreciated as I am really excited to start playing with lasers!
Real.Eyez
 
Posts: 1
Joined: Sun Nov 06, 2016 12:38 pm

Re: EtherDream V2

Postby eric.b » Tue Mar 19, 2019 11:15 am

Polling on the EtherDream DAT should list the available EtherDream devices, including their IP.
User avatar
eric.b
Staff
 
Posts: 114
Joined: Mon Jun 13, 2016 3:53 pm
Location: Toronto

Re: EtherDream V2

Postby StateOfLux » Wed Mar 20, 2019 7:17 am

Real.Eyez wrote:any tips on acquiring the IP address i need to input to the dmx-out CHOP


Just to check, you need to send data via the Etherdream CHOP, not DMX.
StateOfLux
 
Posts: 26
Joined: Sat Oct 04, 2014 9:31 am
Location: London

Re: EtherDream V2

Postby StateOfLux » Wed Mar 20, 2019 7:19 am

StateOfLux
 
Posts: 26
Joined: Sat Oct 04, 2014 9:31 am
Location: London


Return to Hardware

Who is online

Users browsing this forum: No registered users and 3 guests